2026 Figure Dust Protection: What to Look For
Everything below is written for new collectors who are weighing 2026 figure dust protection — the numbers, the trade-offs and the details that decide whether the piece still looks right three years in.
Polystone Care in Three Rules
Support the base, never lift by the head or an arm, and never reach for a solvent when a stain appears. Polystone is brittle under point impact and slightly porous, so handling and cleaning decide how a piece looks in five years far more than the initial paint job does.
Dusting and Cleaning
Dust open shelving weekly, enclosed cases monthly, with a 2–3 cm soft brush working top-down so debris falls away rather than into panel gaps. For cleaning use lukewarm water with one drop of pH-neutral soap on a nearly dry microfibre, then buff dry. Compressed air drives grit into seams, so a brush is the safer tool.
Maintenance Calendar
- Weekly: dust open shelving top-down with a soft brush.
- Monthly: dust enclosed cases, check no piece rocks on its base.
- Quarterly: inspect seams under bright light for hairline cracks.
- Every 6 months: replace silica gel, rotate stored pieces back on display.
Carton Sizes That Fit
A 32 cm piece such as the ASH 1/4-scale polystone bust needs an inner carton near 40 × 30 × 30 cm and an outer near 50 × 40 × 40 cm. The 34 cm LIN YUANZHE 1/4-scale articulated bust with extended armour wants 42 × 32 × 32 cm inside and 52 × 42 × 42 cm outside, plus 4 cm per side if the panels are posed open rather than closed.
Two-Box Dimensions
| Piece | Inner carton | Outer carton |
|---|---|---|
| ASH 1/4-scale polystone bust | 40 × 30 × 30 cm | 50 × 40 × 40 cm |
| LIN YUANZHE 1/4-scale articulated bust | 42 × 32 × 32 cm | 52 × 42 × 42 cm |
The short version: material and edition size set the ceiling, finish sets the day-to-day impression, and display decides how much of that you actually see.