Figure Photography Buying Guide
A practical breakdown of figure photography buying guide, aimed at new collectors. No marketing language — just the specification, the construction and the display consequences.
Light Damage Is Cumulative
UV breaks polymer chains in paint binders and clear coats; the damage shows first as lost gloss, then as yellowing, and it is irreversible. This is why a piece can look perfect for two years and dull by year four without anything ever touching it — the light was doing the work the whole time.
Plan Numbers
| Constraint | Target |
|---|---|
| Footprint | ~25 × 25 cm |
| Vertical envelope | ~65 cm |
| Per 180 cm shelf | 6 comfortable |
| Extra depth for LIN | +5–8 cm |
Plan the Footprint First
A quarter-scale bust needs a footprint near 25 × 25 cm and a vertical envelope of about 65 cm, covering the roughly 32 cm piece plus base clearance and open air above the head. Measure the shelf and photograph the tape measure against it so the number is real, not remembered.
Shelf Length vs Volume
Length decides count; depth and headroom decide comfort. A deep shelf with low clearance still crowds a 34 cm piece. Check all three before buying, not just how many will line up along the front, because the head needs air above it.
Warm White LED Wins
Halogen is the worst common choice: it dumps both UV and convective heat onto the piece. Warm white LED at 2700–3000 K with under 0.1% UV and a colour rendering index of 90 or higher is the practical answer, provided the fixture genuinely filters UV and infrared rather than merely claiming to on the box.
Judge a piece by three numbers — material, scale and edition size — then by the finish. Everything else is decoration.