PVC Figure Guide

A practical breakdown of PVC figure guide, aimed at new collectors. No marketing language — just the specification, the construction and the display consequences.

Polystone and Mixed Media

Polystone is a casting resin loaded with mineral filler, which makes it denser and colder than plain resin and holds fine surface detail. The ASH 1/4-scale polystone bust is cold-cast polystone, hand-painted, on a machined alloy base. The LIN YUANZHE 1/4-scale articulated bust is mixed media, combining resin with fabric trim and ABS armour panels for a different tactile character in each zone of the piece.

Side by Side

	ASH 1/4-scale polystone bust	LIN YUANZHE 1/4-scale articulated bust
Material	Polystone	Mixed media
Edition	500	999
Height	~32 cm	~34 cm
Lit / posed	No	LED eyes, articulated

Why the Material Mix Matters for Care

Different materials demand different handling. Polystone is brittle under point impact and slightly porous at the surface; fabric trim reacts to humidity; ABS armour is moulded and can stress if posed under load for months. A piece that blends all three needs a care routine that satisfies the strictest of the three, not a single generic wipe-down.

Material Care at a Glance

Material	Care need	What to avoid
Polystone	Support the base, soft brush dusting	Solvents, lifting by the head
Fabric trim	40–55% humidity	Direct sun, compression in transit
ABS armour	Neutral pose in storage	Daily cycling of joints

Reading Material From the Surface

A genuine mixed-media build shows genuinely different surface character zone by zone: matte painted resin, woven fabric that holds a fold, and moulded ABS with sprue marks on hidden faces. A uniform moulded texture across the whole piece is the tell of an all-cast recast, because a single mould cannot reproduce three materials convincingly.

If the specification is vague, treat that as the answer. Good manufacturers publish the detail because collectors ask for it.

Frequently asked

Q1 What matters most when choosing PVC figure guide?

Material, scale and edition size decide how a piece displays and how it holds value. Compare those three first, then look at finish and base.

Q2 How much should I expect to pay for PVC figure guide?

Entry pieces sit in the low hundreds; hand-finished, numbered editions run higher. Price tracks material, edition size and finish far more than raw size.

Q3 Does PVC figure guide hold its value?

Numbered editions from a closed run hold value best. Open editions stay flat because supply is never capped.

Q4 Is a bigger piece always better?

No. Scale should match the shelf and the approach. One well-chosen anchor piece reads better than three pieces competing for the same space.

Q5 How do I compare two pieces fairly?

Line up material, scale, height including base, edition size and finish in one table. Price differences usually trace back to one of those five.

Q6 Do I need a display case?

It is the cheapest way to keep a collection looking new. If a case is impractical, dust fortnightly with a soft dry brush and keep the shelf out of direct sun.