Resin Figure vs PVC Figure

If you are comparing resin figure vs PVC figure, the useful questions are narrower than most guides admit: what it is made of, how it is finished, how big it actually is, and how many exist.

Polystone and Mixed Media

Polystone is a casting resin loaded with mineral filler, which makes it denser and colder than plain resin and holds fine surface detail. The ASH 1/4-scale polystone bust is cold-cast polystone, hand-painted, on a machined alloy base. The LIN YUANZHE 1/4-scale articulated bust is mixed media, combining resin with fabric trim and ABS armour panels for a different tactile character in each zone of the piece.

Hand-Painted Finish

The ASH 1/4-scale polystone bust is hand-painted, which is why edge transitions are crisp and sheen is consistent across panels. Hand work is the reason no two pieces share exactly the same micro-variation, and why any touch-up always reads as a patch rather than as original paint, so prevention beats repair.

Side by Side

	ASH 1/4-scale polystone bust	LIN YUANZHE 1/4-scale articulated bust
Material	Polystone	Mixed media
Edition	500	999
Height	~32 cm	~34 cm
Lit / posed	No	LED eyes, articulated

Reading Material From the Surface

A genuine mixed-media build shows genuinely different surface character zone by zone: matte painted resin, woven fabric that holds a fold, and moulded ABS with sprue marks on hidden faces. A uniform moulded texture across the whole piece is the tell of an all-cast recast, because a single mould cannot reproduce three materials convincingly.

Edition Size vs Availability

ASH 1/4-scale polystone bust's 500 is the tighter cap; LIN's 999 is larger but still small. A larger edition is not the same as easy to find later — once a run closes, the secondary market sets the price either way, and a closed run of 999 is no easier to source than a closed run of 500.

Read the specification before the photograph, buy the piece you would keep even if the price never moved, and plan the shelf at the same time as the purchase.

Frequently asked

Q1 What matters most when choosing resin figure vs PVC figure?

Material, scale and edition size decide how a piece displays and how it holds value. Compare those three first, then look at finish and base.

Q2 How much should I expect to pay for resin figure vs PVC figure?

Entry pieces sit in the low hundreds; hand-finished, numbered editions run higher. Price tracks material, edition size and finish far more than raw size.

Q3 Does resin figure vs PVC figure hold its value?

Numbered editions from a closed run hold value best. Open editions stay flat because supply is never capped.

Q4 Is a bigger piece always better?

No. Scale should match the shelf and the approach. One well-chosen anchor piece reads better than three pieces competing for the same space.

Q5 How do I compare two pieces fairly?

Line up material, scale, height including base, edition size and finish in one table. Price differences usually trace back to one of those five.

Q6 Do I need a display case?

It is the cheapest way to keep a collection looking new. If a case is impractical, dust fortnightly with a soft dry brush and keep the shelf out of direct sun.